Lab. Instruments

Products » Lab. Instruments
1 2 3 4 5 6 [7] [«Back ]
Serological Water Bath
Click to Enlarge

Serological Water Bath

(2094 )
Temperature range from few degrees above ambient temperature to 100ºC. These units are double walled with inner chamber made of Stainless Steel and outside of M.S duly enamel or powder coating painted. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit, the inner chamber fitted with immersion type heating element is covered wih the unit as a standard accessory. Lid of water bath is made of stainless steel. To work on 220/230 Volts A.C
Chamber Size Suitable Racks Cap.(aprox)
300x175x175 1Rack 12Ltrs
300x250x175 2Racks 14Ltrs
375x300x175 4Racks 18Ltrs
455x300x175 6Racks 25Ltrs
605x300x175 8Racks 32Ltrs
Optional :
1. Digital temperature Indicator cum Controller
2. Microprocessor PID Digital Temp. cum Controller
3. Stirrer arrangement with 1/20 HP motor and speed regulator.

More detailQuantity :

Water Bath Rectangular Thermostatic (Double Walled)
Click to Enlarge

Water Bath Rectangular Thermostatic (double Walled)

(HL-2095 )
It is a double walled bath with inner chamber made of stainless steel and outer wall made of M.S sheet duly enamel or powder coating painted. The gap between outer and inner walls is fitted with special grade glass wool insulation. The temperature is controlled by a thermostat from room temperature to 100°C with variation of ± 2%° C. The concentric rings can be removed to accommodate containers of various sizes
Size Inside Chamber
1. 300x250x100mm 6 Holes of 75mm dia
2. 355x405x100mm 12 Holes of 75mm dia

More detailQuantity :

Water Bath Rectangular (Single Walled)
Click to Enlarge

Water Bath Rectangular (single Walled)

(HL-2096 )
Made out of heavy gauge stainless steel with concentric rings. Auto cut heating elements are fitted to protect the same when bath gets dry. To work on 220/230 volts A.C.
Size inside Chamber
1. 300x250x100mm 6 Holes of 75mm dia
2. 355x405x100mm 12 Holes of 75mm dia

More detailQuantity :

Rotary Shaker(Platform Type)
Click to Enlarge

Rotary Shaker(platform Type)

(HL-2019 )
Body made out of thick mild steel finished with powder coating.Heavy duty motors for suitable capacities are provided for long time continuous operation.Fixed speed and variable speed models are offered.Platform is provided with lotus type clamps or rubber discs to hold flasks.
RPM Range-upto 200RPM.electronic control 0-60min.timer. Workable on 220V AC 50Hz.Single Phase.
Platform size in cm. Holding Capacity Motor Type
45x45cm. 36 Flasks of 50ml. PMDC
45x45cm. 25 flasks of 100l. PMDC
45x45cm. 15 flasks of 250ml. PMDC
55x55cm. 25 flasks of 250ml. PMDC
65x65cm ` 36 flasks of 250ml. PMDC
105x105cm. 64 flasks of 250ml. PMDC
105x105cm. 81 flasks of 250ml. PMDC
Optional(Extra Cost)
1. Digital RPM Indicator
2. Digital Timer(0-99 minutes)

More detailQuantity :

Click to Enlarge


( )
For agarose DNA GEL Electrophoresis
1. Submarine Tank with comb slots
2. Power supply 50/100V
3. Acrylic comb-pre height adjusted
4. Connecting cord
Gel Size : 100x70mm
Dimension MM : 160x80x20mm
Buffer Vol. : 170ml approx.
Comb: 8well
Comb Thic. : 1.5mm
Capacity/well : 40µl

More detailQuantity :

Click to Enlarge

Bacteriological Incubator

( )
BACTERIOLOGICAL INCUBATOR Provided with digital temperature controller cum indicator in lieu of thermostate & fitted with fan fan to achive same temperature,in each & every corner of the chamber.
Standard double wall fabrication. Inner chamber is made out of richly anodized alluminium or highly polished stainless steel sheet and outer is made of thick mild steel finished with powder coating with light color combinations. The gap is fitted with high grade glass wool for heat insulation. Double wall door with double toughened glass windows is provided for observation in the chamber.
Temperature range 5° C above ambient to 110° C is controlled by Digital Temperature controller is provided for taking temperature readings. Heating is achieved from three sides.Supplied with plug and chord. Equipment suitable to be working on 220V AC 50Hz single phase.
Chamber Size In mms/inches : Cap. (App.)
300 x 300 x 300 (12" x 12" x 12") : 28 L
350 x 350 x 350 (14" x 14" x 14") : 45 L
400 x 400 x 400 (16" x 16" x 16") : 65 L
450 x 450 x 450 (18" x 18" x 18") : 95 L
600 x 450 x 450 (24" x 18" x 18") : 125 L
600 x 600 x 600 (24" x 24" x 24") : 224 L

More detailQuantity :

Hot Plate
Click to Enlarge

Hot Plate

( )
PHYSILAB Hot Plate Rectangular
Laboratory hot plates are available in round and rectangular shapes.Body is fabricated out of thick mild steel duly finished with powder coating.heater made of kanthal wire to operate on 220V AC 50Hz single phase.Heat is controlled by three point ritary switch with an indicator lamp fo mains etc.
24"X18" Rectangular
Optional(Extra Cost)
1. Energy Regulator
2. Digital Temperature Controller PID
Microprocessor Based.

More detailQuantity :

Lab Refrigrator
Click to Enlarge

Lab Refrigrator

( )
‘PHYSILAB’ Lab Refrigerator
Salient Features :-
1.Corrosion Free exterior and interior Audio visual alarm for high and low temperature.
2. Special design ensuring best hygiene reliable.
3. Sturdy Construction.
4. Digital Temperature indication.
5. Low Maintenance.
6.Light Weight.
Construction Detail :-
PHYSILAB Lab Refrigerator is double walled. Outer body of our Lab Refrigerator are constructed out of thick steel/aluminum sheets, painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of 304 grades. The 100mm gap between the walls is insulated with high grade poly uretherane insulation, which ensures maximum thermal efficiency. Outer
The outer panels of our entire Lab Refrigerator are made of galvanized mild steel having a superior bacteria resistance coating for greater hygiene. Cooling:- An energy efficient cooling unit is installed in our Lab Refrigerator. We use ISI marked high end CFC free Compressors of Kirloskar/Tecumesh/Denfoss make, conforming to latest international standards and guidelines.
1. Mounted on a sturdy angle frame the inner chamber is made up of stainless steel 304 grade with 26 SGW and outer of mild steel(C.R Sheet) 20 & 22 SGW duly enamel painted.
2. Double walled units have thick PUF insulation between inner and outer wall.
3. The temperature is maintained with in 2ºC to 8ºC.Temperature is controlled by Digital Indicator-cum-Controller.
4. Unit is provided with Audio Visual Alarm which triggers in the event of fluctuation exceeding permitted tolerance.
5. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions.
6. Unit is also fitted with Power Supply Failure Alarm as a safety device Three or four drawers are provided for holding laboratory material.
7. CFC Free ECO Friendly Compressor.
8. Body is mounted on caster wheels to move the refrigerator anywhere in lab.
9. Capacity 171 Liters. Volume 6.1 Cuft.
10. The refrigerator work on 220/230Volts AC Supply, Make ‘PHYSILAB’ with ISO Certified Co.

More detailQuantity :

Click to Enlarge

Bio Chemical Oxygen Demand

( )
Bio Chemical Oxygen Demand(B.O.D. Incubator)
PHYSILAB Bio Chemical Oxygen Demand(B.O.D. Incubator ):- Designed for low Temperature incubation and routine determination of Bio-Chemical Oxygen demand (B.O.D.). This unit is composed for doubled walled chamber with a thick layer of fine glass wool to prevent loss of heat and cool. For work in lower temperature a cooling unit is provided at the lower portion of the working chamber and heating arrangement has been made in the inner chamber for work of higher temperature. The temperature varies from 5º C to 60º C adjustable at any desired point by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5º C. Air Circulating fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is made up of richly anodized aluminum or highly polished stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in powder coating. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Refrigeration unit is formed by ISO/ISI marked compressor. Control panel is provided with toggle switch, temperature controller, various indicators etc. Complete with automatic internal light, L- shaped thermometer, connecting cord and plug to work on 220V AC 50 Hz single phase.
Chamber Size in mm Cap. (Cu. Ft) Cap.(Aprox.)
455x410x610 4 112L
6 171L
565x565x865 10 280L
650x580x900 12 336L
700x650x900 15 420L
Optional Extra Cost :-
a. Timer 0 – 24 hours.
b. Internal illumination with 3 florescent tubes.

More detailQuantity :

1 2 3 4 5 6 [7] [«Back ]


 : 0Show Cart


Home|About Us|Products|Enquiry|Contact Us|Links
Copyright © H.L. Scientific Industries 2011. All Rights Reserved.

Lab Instruments Manufacturers,Laboratory Instruments Suppliers and Lab Equipments Exporters from India