Physilab  

Physics Research Instruments

Products » Physics Research Instruments
 
1 2 3 4 5 [6] 7 8 9 10 11 12 13 14 15 16 17 18 [«Back ||Next »]
 
Rising Table With Capillary Tube
Click to Enlarge

Rising Table With Capillary Tube

(HL-1079)
The apparatus comprise metal frame, on which four capillary tubes of 10cm. long and of different internal diameters are clamped with the help of small metal brackets. The 9mm. rod is also attached to metal plate, so that complete clamp can be held in any stand for determining the surface tension of liquid by capillary rise method. Its having a cast aluminium 4" dia table with adjustable stand. Maximum height capacity 12".

More detailQuantity :



Viscometer Searles Pattern
Click to Enlarge

Viscometer Searles Pattern

(HL-1080)
It is used for measuring viscosity of very viscos liquids.The outer cylinder can be clamped at any desired height and the inner cylinder is graduated in mms and slot is covered by a transparent cover. Complete with scale pans and releasing pin.

More detailQuantity :



Bar Pendulum(Compound Pendulum)
Click to Enlarge

Bar Pendulum(compound Pendulum)

(HL-1081)
A chrome plated steel bar of dimension 100x3.75x0.6cm. with a number of equidistant holes at equal intervals of 5cm. Provided with two removable knife edges passing through any one of the holes and with wall bracket.

More detailQuantity :



Platinum Resistance Thermometer
Click to Enlarge

Platinum Resistance Thermometer

(HL-1082)
The resistors are of mangain coils bridge wire is accurately calibrated. Vernier is attached to the sliding contact and fine slow motion available mercury contacts are fitted. Length of the slidewire is 30cm. Resistance values are 0.1,0.2,0.4,0.8,1.6,3.2,6.4,12.8 and 0.15ohm for 30cm slide wire.Range of resistance measurable.

More detailQuantity :



Banana Plug/Crocodile Clips
Click to Enlarge

Banana Plug/crocodile Clips

(HL-1083)

More detailQuantity :



Terminals/Screws
Click to Enlarge

Terminals/screws

(HL-1084)

More detailQuantity :



Bending of Beam Apparatus
Click to Enlarge

Bending Of Beam Apparatus

(HL-1086)
BENDING OF BEAM APPARATUS: Consisting of two G.clamp with knife-edge top. Comprising a metal bar of 100 cm length having width 25 mm and thickness 4.5 mm. Sharp knife edge with hanger is also provided which moves on metal bar. A spherometer fitted on a cast iron stand (Specially designed for this apparatus) with electric contacts is also provided, but without weight.

More detailQuantity :



Boltons Apparatus
Click to Enlarge

Boltons Apparatus

(HL-1087)
A steel frame mounted on a heavy cast iron base with leveling screws. Upper end of rod (under test) 900mm length and 5mm dia is clamped by a 3-jaw chuck and the lower end is clamped into the axis of a torsional drum which can be rotated by putting load in the scale pan passing over two frictionless pulley. Freely sliding three circular scales graduated in single degrees can be clamped at any position. Three pointer for clamping to the test rod are provided. Complete with three test rods, strings and two scale pans, but without weight.

More detailQuantity :



Cathetometer
Click to Enlarge

Cathetometer

(HL-1088)
The instrument is designed for use n the vertical and horizontal planes. The vertical guide bar is made of metal and is of special type. It rotates on ball centres having bearings and can be clamped in any position. The cast iron frame supporting the vertical guide bar is fitted with leveling screws. Range either 50CMS. or 100CMS.
 
a) Telescope superior 50cm long
b) Telescope superior 100cm long

More detailQuantity :



Leclanche Cell
Click to Enlarge

Leclanche Cell

(HL-1089)
It consists of either glass or plastic container 95x95x150mm (LengthxWidthxHeight). For cathode a zinc rod with terminal and for Anode a filled porous pot is supplied. Requires approx. 500ml ammonium chloride electrolyte supplied without electrolyte.

More detailQuantity :



Water Voltameter With Electrode
Click to Enlarge

Water Voltameter With Electrode

(HL-1090)
Water Voltameter with Electrode

More detailQuantity :



Cell Battery Lead Accumulator 2C, 20AH
Click to Enlarge

Cell Battery Lead Accumulator 2c, 20ah

(HL-1091)
B 2V 45ah
C 6V GlOBE
D 12VLARGE

More detailQuantity :



Decade Condenser Box
Click to Enlarge

Decade Condenser Box

(HL-1092)
Prepared in one or more dials each consisting of ten steps fitted in Teak Wood Polished case. Each dial has 10steps.
 
A) One Dial(any one range)
B) Two Dials(any one range)
C) Three Dials(any one range)
D) Four Dials(any one range)
E) Five Dials(any one range)

More detailQuantity :



Copper Voltameter
Click to Enlarge

Copper Voltameter

(HL-1094)

More detailQuantity :



Deflection Magnetometer
Click to Enlarge

Deflection Magnetometer

(HL-1095)
A sensitive compass box mounted at the centre of a non-magnetic wooden base about one meter long (Sunmica Top), a metric scale extending outward from each side of the compass box for observing the position of the magnet tested. The compass direction is indicated in degrees. Dimension 40"x5" with aluminium cup at the centre for holding compass box. Supplied with compass but without magnet.

More detailQuantity :




1 2 3 4 5 [6] 7 8 9 10 11 12 13 14 15 16 17 18 [«Back ||Next »]


 
 
 
 
 
 

Items in Cart : 0Show Cart

 
 

Home|About Us|Products|Enquiry|Contact Us|Links
Copyright © H.L. Scientific Industries 2011. All Rights Reserved.

Physics Research Instruments Physics Lab Equipments Manufacturers, Physics Instruments Suppliers and Exporters, Physics Research Instruments India